Description
EASY BROME
SANITIZER
Is a practical easy to use sanitizer for spa and hot tub water.
It rapidly and completely dissolves to provide effective bromine disinfection
without cloudy or insoluble residue in the water.
Is a super oxidation
treatment to rid spa water of organic waste such as perspiration, body oil,
cosmetics that tend to cloud water.
Can be used as a pre-treatment to
create a bromine bank in bromine spas and hot tubs.
1.
Maintain recommended daily levels as determined by testing kit.
Free
available bromine: 3.0 - 5.0 ppm
pH: 7.2 - 7.8
Total alkalinity:
100 - 120 ppm
Calcium hardness: 150 – 200 ppm
2. The
filtration system should be maintained in order to ensure proper disinfection.
3. Apply 6 g of EASY BROME per 1,000 L of spa water directly to bather-free
spa water with circulation system operating. Test for available bromine and repeat
above dosage at 15-20 minute intervals until a residual of 3.0 – 5.0 ppm is
reached.
4. Periodic superchlorination of spa water is recommended
after heavy use, or once a week, in moderately used spas to remove organic
waste. Apply 35 g of EASY BROME per 1,000 L of spa water as often as required.
Bathers should not use spa until reading drops to 5.0 ppm.
5. Persistent
foam formation, turbid, or malodorous water, are indicators of inadequate sanitizer
levels. To correct such conditions, superoxidize water by adding 25 g of EASY
BROME per 1,000 L of spa water. Maintain circulation at least 30 minutes and wait
4 hours before using. EASY BROME contains stabilizer (cyanuric acid) which will
accumulate in spa water. Keep stabilizer within 30-100 ppm range by dilution with
fresh water.
6. For proper sanitation, spa must be completely drained
periodically.
BROMINE SANITATION:
Test
bromine levels daily.
Maintain a daily bromine sanitizer level of 3 – 5
ppm.
Use on initial fill of spa and weekly for maintenance.
Can be used to pre-treat bromine spas and hot tubs.
Timmin's Online Pool and Spa Equipment and Supply Superstore!