AND ALGAE in Swimming Pool Water.
recommended daily levels as determined by testing kit. Free available chlorine: 1.0
– 3.0 ppm pH: 7.2 – 7.8 Total alkalinity: 80 – 120 ppm Calcium hardness: 200 –
2. For outdoor pools, chlorine residuals can be protected from
destruction by the sun’s rays by adding 300 g of STAB/COND per 10,000 L of pool
water to yield the required initial concentration of 30 ppm.
3. If using an
automatic chlorinator, fill the chamber(s) with MAXI PUCKS and adjust flow rate
according to manufacturer’s recommendations to maintain proper chlorine
residual. Adding tablets to the pool’s skimmer basket is an alternative chlorine feed
method. Daily usage should approximate 25 g of MAXI PUCKS per 10,000 L of
4. Periodic superchlorination of pool water is recommended.
Follow label instructions of T.N.T.
NOTE: Hot weather,
heavy pool usage and rain may require higher usage rates to maintain proper
MAXI PUCKS contains cyanuric acid stabilizer which
can accumulate in pool water. Keep stabilizer within the recommended range of
30–100 ppm by dilution with fresh water. The ideal range is 30-50 ppm.